|
Post by Phantom Major on Sept 24, 2005 18:15:29 GMT
Inside the box you get one resin female figure in 1/12th scale, that is separated into five sections. The figure is in a standing posture, with her hands on her hips. The clothing she has on consists of an all in one body top that covers her chest, arms and crotch. She is also wearing a pair of thigh legnth, fetish boots as well. The kit hits a high standard in casting with few if any air bubbles as well as excellent fit for all the parts of the kit. One draw back is the large resin casting block that is still attached too the torso section and has to be removed carefully. This is a standard of Legend kits as i have another figure with a similar feature waiting to be built. The only issues i have with detail are around the back of the head. I noticed there were several small peices of rubber still attached too the kit from when it was removed from the mold which suggests that the mold used fo my figure was coming to the end of it's natural life.
|
|
|
Post by Rayzer on May 20, 2006 13:10:33 GMT
Phantom, the rubber you saw in your casting may be just the opposite of what you think. Sometimes small bits of rubber will tear out from a very new mold since it has not been used much and the resin is just starting to grab these new, very thin membranes of rubber.
|
|
|
Post by Phantom Major on May 20, 2006 21:45:09 GMT
Thanks Rayzer...i had notice that the area the rubber was stuck too was lacking in clearly defined detail so i just put it down to a well used mold. thanks for setting me straight !
oh and i nearly forgot...Welcome too the Site !
|
|